Structures
No-Climb & Woven Wire Farm Fencing in North Georgia
No-climb horse wire, woven wire and field fencing that contains horses, livestock and dogs safely across North Georgia acreage.
Woven wire is the safest containment for horses and the most reliable for small livestock, but it only works when it is stretched correctly against real bracing. A loose no-climb fence is a hazard, not a fence.
Part of our Farm & Estate Fencing, Gates and Entries in North Georgia work across North Georgia.
What we see most often
- Wire sagging because the brace assemblies were undersized
- Gaps under the fence where grade dips and animals get out
- Barbed or field fence used where horses can get a hoof through
- Cheap fasteners failing before the wire does
Scope of work
What this work includes
Bracing & post system
Proper H-brace or floating brace assemblies at every corner, end, gate and grade change, since the wire is only as good as the bracing.
Wire selection
2x4 no-climb, woven field fence, or high-tensile chosen for the animals contained and the predators kept out.
Stretching & attachment
Mechanically stretched to specification and fastened so tension is maintained across the full run.
Ground contour management
Following grade, filling dips and adding a bottom rail or ground wire where animals would otherwise push under.
Containment that stays tight and safe across every dip and corner of the property.
How it goes
Our process
- Step 01
Clear the line
Open and level the run so the wire can lie true.
- Step 02
Brace
Build corner and end assemblies to carry full tension.
- Step 03
Stretch
Pull wire to spec with proper equipment, not by hand.
- Step 04
Trim out
Top rail, gates, ground gaps and hardware.
Common questions
No-Climb Fencing questions we get
- Is no-climb fence the safest option for horses?
- It is widely considered so. The 2x4 mesh is too small for a hoof to pass through, and adding a top board or rail gives visibility so horses see the fence before they hit it.
- How tight should woven wire be?
- Tight enough that it barely deflects under hand pressure, which requires mechanical stretching against a solid brace. Wire that can be pushed easily will eventually be pushed through.
- Can no-climb be added to existing board fence?
- Yes, and it is a common upgrade — the boards give visibility and structure while the mesh handles containment of foals, dogs and small stock.
- What about hilly ground?
- Woven wire follows contour well if the line is cleared and posts are spaced closer through the changes. Dips get filled or a bottom rail added to close gaps.
Where we work
Fencing & Entries across North Georgia
We handle fencing & entries for property owners across the north side of Atlanta — Cumming, Milton, Alpharetta, Roswell, Buckhead, Sandy Springs, Marietta, Woodstock, Canton and Ball Ground — and up through Jasper, Ellijay and Blue Ridge. Choose your area for local conditions, permitting and recent work nearby.
- Fencing & Entries in MiltonFulton County
- Fencing & Entries in CantonCherokee County
- Fencing & Entries in Ball GroundCherokee County
- Fencing & Entries in CartersvilleBartow County
- Fencing & Entries in BlairsvilleUnion County
- Fencing & Entries in ClevelandWhite County
Regional overviews: Fencing & Entries in North Georgia Ranch & Equestrian Properties.
Also serving Cumming, Alpharetta, Roswell, Johns Creek, Buckhead, Sandy Springs, Marietta, East Cobb, Woodstock, Jasper, Ellijay, Blue Ridge, Dawsonville, Dahlonega, Helen, Gainesville.
Related work
Board Fencing
Four-board, three-board and split-rail horse fencing set on straight, graded lines for farms in Milton, Alpharetta and Ball Ground in Cherokee County.
ViewGates & Automation
Farm gates, estate entry gates, openers, keypads and safety loops installed on posts set to swing free year after year.
ViewEntry Columns
Masonry entry columns, signage, lighting and finished estate entrances for horse farms and acreage properties in North Georgia.
ViewStart here
Tell us about your property
Send the basics and we'll come back with a straight answer on what your site needs, what order to do it in, and what it's likely to cost.